Installing a new AC without checking line set length, refrigerant match, and cooling load is how Windsor homeowners end up with a unit that never performs to spec. We assess before we recommend equipment.
New AC installs miss their rated SEER2 efficiency more often than people realize, usually from oversizing or a mismatched line set. We follow real numbers, not the easiest install.
What we don't cut corners on.
Tonnage recommendations come from an actual load calculation, not a rule of thumb.
Multiple efficiency options are available to fit different budgets.
You get a written labor warranty on top of manufacturer coverage.
Line sets follow manufacturer specification, not the shortest physical route, since a bad run quietly kills efficiency.
From load calculation to startup commissioning.
A full assessment determines actual cooling demand, not a generic estimate.
SEER2 ratings get explained in plain terms so the decision is based on real numbers, not marketing language.
We follow the spec, avoiding efficiency losses from a poor run.
Units get placed away from heat traps and debris for airflow and noise, not just wherever's convenient.
Charge, airflow, and temperature split all get verified after install, not just assumed correct.
Old systems get removed and disposed of properly, refrigerant recovered per EPA regulation.
Four steps from assessment to cold air.
An on-site visit gets scheduled, since accurate sizing can't be done by phone.
Assessment tools arrive on-site for a direct evaluation.
The quote includes several SEER2 efficiency tiers based on your actual load numbers.
We install, verify performance, and back the work in writing.
Feedback from completed AC installation projects.
Compared quotes from four companies before deciding. This was the only one that showed me actual Manual J numbers instead of a flat price sheet.
— T. Longworth, homeowner
We wanted the quietest unit available since our bedroom windows face the side yard where it sits. They steered us toward a model rated specifically for noise.
— I. Adeyinka, homeowner
Had a mini-split installed in a converted garage that never had ductwork. Clean install, didn't have to cut into any walls we cared about.
— C. Bergstrom, homeowner
Installed new rooftop units at two of our retail locations within the same week. Consistent process and pricing at both sites.
— N. Falkirk, retail operations manager
Common questions before a Ac Installation project.
A proper on-site calculation is the only reliable way to size correctly.
Depends on your climate and how long you'll own the home, we walk through the math.
A typical install wraps up in one day, longer for complex line runs.
Handled on our end, to EPA standard.
Both system types are covered, chosen based on the property.
If something about how the unit was put in causes a problem down the line, that's on us to fix at no charge, on top of whatever the manufacturer covers on the equipment itself.
Our coverage spans Windsor and nearby zips shown here — call to schedule.
Call +1-844-611-2875
